General Description
The MAX4265–MAX4270 ultra-low distortion, voltage-feed back op amps are capable of driving a 100Ω load while maintaining ultra-low distortion over a wide bandwidth.
They offer superior spurious-free dynamic range (SFDR) performance: -90dBc at 5MHz and -59dBc at 100MHz (MAX4269). Additionally, input voltage noise density is 8nV/√Hz while operating from a single +4.5V to +8.0V supply or from dual ±2.25V to ±4.0V supplies. These features make the MAX4265–MAX4270 ideal for use in high-performance communications and signal-processing applications that require low distortion and wide bandwidth. The MAX4265 single and MAX4268 dual amplifiers are unity-gain stable. The MAX4266 single and MAX4269 dual amplifiers are compensated for a minimum stable gain of +2V/V, while the MAX4267 single and MAX4270 dual amplifiers are compensated for a minimum stable gain of +5V/V.
For additional power savings, these amplifiers feature a low-power disable mode that reduces supply current and places the outputs in a high-impedance state. The MAX4265/MAX4266/MAX4267 are available in a space saving 8-pin µMAX® package, and the MAX4268/MAX4269/MAX4270 are available in a 16-pin QSOP package.

Features
♦ Operates from +4.5V to +8.0V
♦ Superior SFDR with 100Ω Load
   -90dBc (fC = 5MHz)
   -59dBc (fC = 100MHz)
♦ 35dBm IP3 (fC = 20MHz)
♦ 8nV/√Hz Voltage Noise Density
♦ 100MHz 0.1dB Gain Flatness (MAX4268)
♦ 900V/µs Slew Rate
♦ ±45mA Output Driving Capability
♦ Disable Mode Places Outputs in High-Impedance State

Applications
   Base-Station Amplifiers
   IF Amplifiers
   High-Frequency ADC Drivers
   High-Speed DAC Buffers
   RF Telecom Applications
   High-Frequency Signal Processing