Description
The IDT70261 is a high-speed 16K x 16 Dual-Port Static RAM. The IDT70261 is designed to be used as a stand-alone Dual-Port RAM or as a combination MASTER/SLAVE Dual-Port RAM for 32-bit-or-more word systems. Using the IDT MASTER/SLAVE Dual-Port RAM approach in 32-bit or wider memory system applications results in full-speed, error-free operation without the need for additional discrete logic.
   
Features
◆ True Dual-Ported memory cells which allow simultaneous
    access of the same memory location
◆ High-speed access
    – Commercial: 15/20/25/35/55ns (max.)
    – Industrial 20/25ns (max.)
◆ Low-power operation
    – IDT70261S
        Active: 750mW (typ.)
        Standby: 5mW (typ.)
    – IDT70261L
        Active: 750mW (typ.)
        Standby: 1mW (typ.)
◆ Separate upper-byte and lower-byte control for multiplexed
    bus compatibility
◆ IDT70261 easily expands data bus width to 32 bits or more
    using the Master/Slave select when cascading more than
    one device
◆ M/S = H for BUSY output flag on Master,
    M/S = L for BUSY input on Slave
◆ Busy and Interrupt Flags
◆ On-chip port arbitration logic
◆ Full on-chip hardware support of semaphore signaling
    between ports
◆ Fully asynchronous operation from either port
◆ TTL-compatible, single 5V (±10%) power supply
◆ Available in 100-pin Thin Quad Flatpack
◆ Industrial temperature range (-40OC to +85OC) is available
    for selected speeds
◆ Green parts available. See ordering information