DESCRIPTION:

The IDT7005 is a high-speed 8K x 8 Dual-Port Static RAM. The IDT7005 is designed to be used as a stand-alone Dual Port RAM or as a combination MASTER/SLAVE Dual-Port RAM for 16-bit-or-more word systems. Using the IDT MASTER/SLAVE Dual-Port RAM approach in 16-bit or wider memory system applications results in full-speed, error-free operation without the need for additional discrete logic.

FEATURES:

• True Dual-Ported memory cells which allow simultaneous access of the same memory location

• High-speed access

      — Military: 20/25/35/55/70ns (max.)

      — Commercial:15/17/20/25/35/55ns (max.)

• Low-power operation

      — IDT7005S

          Active: 750mW (typ.)

          Standby: 5mW (typ.)

      — IDT7005L

          Active: 750mW (typ.)

          Standby: 1mW (typ.)

• IDT7005 easily expands data bus width to 16 bits or more using the Master/Slave select when cascading

more than one device

•M/S= H for BUSYoutput flag on Master, M/S= L for BUSYinput on Slave

• Busy and Interrupt Flags

• On-chip port arbitration logic

• Full on-chip hardware support of Semaphore signaling between ports

• Fully asynchronous operation from either port

• Devices are capable of withstanding greater than 2001V electrostatic discharge

• Battery backup operation—2V data retention

• TTL-compatible, single 5V (±10%) power supply

• Available in 68-pin PGA, 68-pin quad flatpack, 68-pin PLCC, and a 64-pin TQFP

• Industrial temperature range (–40°C to +85°C) is available, tested to military electrical specifications