Designed to interface between external PWM control logic and inductive loads such as relays, solenoids, dc motors, or stepper motors, each full bridge can operate with output currents to ±2.5 A and operating voltages to 50 V.
Low rDS(on) DMOS output drivers provide low power dissipation during PWM operation. Internal charge pump circuitry is used to create a boosted voltage to fully enhance the high-side DMOS switches.

FEATURES
■ ±2.5 A Load Current Capability per Bridge
■ Parallel Outputs for 5 A Load-Current Capability
■ Low rDS(on) Outputs Typically 325 mΩ source, 175 mΩ sink
■ Synchronous Rectification via Control Logic
■ Internal Undervoltage Monitor
■ Crossover-Current Protection
■ Source Connections for External Current Sensing
■ Thermal Shutdown Circuitry