Features
■ Industry standard IDC socket
■ Positive locking metal “J” clips provide high cover retention
■ Mates with 3M headers, plugs and pin strips for quick connect/
■ disconnect capability
■ Open or closed end covers available
■ Accepts flat cable or discrete wire
■ Military polarization, with or without centerbump
■ Transfer adhesive on covers provides precision alignment between connector and cables resulting in high yield terminations
■ Availability of pull tab to facilitate proper unplugging
■ Availability of 2 types of strain relief (standard and low profile) to
■ isolate the IDC interface
■ Set the standard for MIL spec and IEC standardization
■ Availability of Military and Center Bump polarization
■ See the Regulatory Information Appendix (RIA) in the “RoHS compliance” section of www.3mconnectors.com for compliance information (RIA E1 & C1 apply) Date Modified: October 12, 201 TS-0718-F Sheet 1 of 3 Physical Insulation: Material: Glass Filled Polyester (PBT) Flammability: UL 94V-0 Color: Gray Contact: Material: Copper Alloy J Clip Material: Stainless Steel Plating: Underplating and U-Slot: 100 μ” [ 2.54 μm ] Nickel Wiping Area: 30 μ” [ 0.76 μm ] Gold Wire Accommodation: 26 and 28 AWG Solid and Stranded