Overview
The LC75810E and LC75810T are 1/8 to 1/10 duty dot matrix LCD display controllers/drivers that support the display of characters, numbers, and symbols. In addition to generating dot matrix LCD drive signals based on data transferred serially from a microcontroller, the LC75810E and LC75810T also provide on-chip character display ROM and RAM to allow display systems to be implemented easily.

Features
• Controls and drives a 5 × 7, 5 × 8, or 5 × 9 dot matrix LCD.
• Supports accessory display segment drive (up to 80 segments)
• Display technique:
    1/8-duty, 1/4-bias drive (5 × 7 dots, 6 × 7 dots)
    1/9-duty, 1/4-bias drive (5 × 8 dots, 6 × 8 dots)
    1/10-duty, 1/4-bias drive (5 × 9 dots, 6 × 9 dots)
• Display digits:
    16 digits × 1 line (5 × 7 dots),
    15 digits × 1 line (5 × 8 or 5 × 9 dots)
    13 digits × 1 line (6 × 7, 6 × 8, or 6 × 9 dots)
• Display control memory
    CGROM: 240 characters (5 × 7, 5 × 8, or 5 × 9 dots)
    CGRAM: 16 characters (5 × 7, 5 × 8, or 5 × 9 dots)
    DCRAM: 64 × 8 bits
    ALATCH: 80 bits
• Instruction function Display on/off control Smooth up, down, left, and right scrolling of the display
• Provides a backup function based on power saving mode
• The frame frequency of the common and segment output waveforms can be controlled by instructions.
• Built-in display contrast adjustment circuit
• Serial data input supports CCB format communication with the system controller
• Independent LCD driver block power supply VLCD
• Provides a RES pin for IC internal initialization.
• RC oscillator circuit