|
Product Description The SST39VF1601C and SST39VF1602C devices are 1M x16 CMOS Multi-Purpose Flash Plus (MPF+) manufactured with SST proprietary, high performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches. The SST39VF160xC writes (Program or Erase) with a 2.7-3.6V power supply. These devices conform to JEDEC standard pinouts for x16 memories. Featuring high performance Word-Program, the SST39VF1601C/1602C devices provide a typical Word-Program time of 7 µsec. These devices use Toggle Bit, Data# Polling, or the RY/BY# pin to indi cate the completion of Program operation. To protect against inadvertent write, they have on-chip hard ware and Software Data Protection schemes. Designed, manufactured, and tested for a wide spectrum of applications, these devices are offered with a guaranteed typical endurance of 100,000 cycles. Data retention is rated at greater than 100 years. Features • Organized as 1M x16: SST39VF1601C/1602C • Single Voltage Read and Write Operations – 2.7-3.6V • Superior Reliability – Endurance: 100,000 Cycles (Typical) – Greater than 100 years Data Retention • Low Power Consumption (typical values at 5 MHz) – Active Current: 9 mA (typical) – Standby Current: 3 µA (typical) – Auto Low Power Mode: 3 µA (typical) • Hardware Block-Protection/WP# Input Pin – Top Block-Protection (top 8 KWord) – Bottom Block-Protection (bottom 8 KWord) • Sector-Erase Capability – Uniform 2 KWord sectors • Block-Erase Capability – Flexible block architecture; one 8-, two 4-, one 16-, and thirty one 32-KWord blocks • Chip-Erase Capability • Erase-Suspend/Erase-Resume Capabilities • Hardware Reset Pin (RST#) • Latched Address and Data • Security-ID Feature – SST: 128 bits; User: 128 words • Fast Read Access Time: – 70 ns • Fast Erase and Word-Program: – Sector-Erase Time: 18 ms (typical) – Block-Erase Time: 18 ms (typical) – Chip-Erase Time: 40 ms (typical) – Word-Program Time: 7 µs (typical) • Automatic Write Timing – Internal VPP Generation • End-of-Write Detection – Toggle Bits – Data# Polling – Ready/Busy# Pin • CMOS I/O Compatibility • JEDEC Standard – Flash EEPROM Pinouts and command sets • Packages Available – 48-lead TSOP (12mm x 20mm) – 48-ball TFBGA (6mm x 8mm) – 48-ball WFBGA (4mm x 6mm) • All devices are RoHS compliant
|