Product Summary
The BTS5235-2G is a dual channel high-side power switch in PG-DSO-20-43 package providing embedded protective functions.
The power transistor is built by a N-channel vertical power MOSFET with charge pump. The device is monolithically integrated in Smart SIPMOS technology.

Basic Features
• Very low standby current
• 3.3 V and 5 V compatible logic pins
• Improved electromagnetic compatibility (EMC)
• Stable behavior at under voltage
• Logic ground independent from load ground
• Secure load turn-off while logic ground disconnected
• Optimized inverse current capability
• Green Product (RoHS compliant)
• AEC Qualified

Protective Functions
• Reverse battery protection without external components
• Short circuit protection
• Overload protection
• Multi-step current limitation
• Thermal shutdown with restart
• Thermal restart at reduced current limitation
• Over voltage protection without external resistor
• Loss of ground protection
• Electrostatic discharge protection (ESD)

Diagnostic Functions
• Enhanced IntelliSense signal for each channel
• Enable function for diagnosis pins (IS1 and IS2)
• Proportional load current sense signal by current source
• High accuracy of current sense signal at wide load current range
• Open load detection in ON-state by load current sense
• Over load (current limitation) diagnosis in ON-state, signalling by voltage source
• Latched over temperature diagnosis in ON-state, signalling by voltage source
• Open load detection in OFF-state, signalling by voltage source

Applications
• µC compatible high-side power switch with diagnostic feedback for 12 V grounded loads
• All types of resistive, inductive and capacitive loads
• Suitable for loads with high inrush currents, so as lamps
• Suitable for loads with low currents, so as LEDs
• Replaces electromechanical relays, fuses and discrete circuits