DESCRIPTION
The TDA9106A is a monolithic integrated circuit assembled in 42 pins shrunk dual in line plastic package.This IC controlsall the functionsrelated to the horizontal and vertical deflection in multimodes or multi-frequency computer display monitors.

HORIZONTAL
■ SELF-ADAPTATIVE
■ DUAL PLL CONCEPT
■ 150kHz MAXIMUM FREQUENCY
■ X-RAY PROTECTION INPUT
■ I2C CONTROLS : HORIZONTAL POSITION, FREQUENCY GENERATOR FOR BURN-IN MODE

VERTICAL
■ VERTICAL RAMP GENERATOR
■ 50 TO 165Hz AGC LOOP
■ GEOMETRY TRACKING WITH V-POS & AMP
■ I2C CONTROLS : V-AMP, V-POS, S-CORR, C-CORR

I2C GEOMETRY CORRECTIONS
■ VERTICAL PARABOLA GENERATOR (Pincushion, Keystone, Corner Correction, Top/bottomCorner Correction Balance)
■ HORIZONTAL DYNAMIC PHASE (Side Pin Balance & Parallelogram)
■ HORIZONTAL AND VERTICAL DYNAMIC FOCUS (Horizontal Focus Amplitude, Horizontal Focus Symmetry)

GENERAL
■ SYNC PROCESSOR
■ HOR. & VERT. SYNC OUTPUT FOR MCU
■ HOR. & VERT. BLANKING OUTPUTS
■ 12V SUPPLY VOLTAGE
■ 8V REFERENCE VOLTAGE
■ HOR. & VERT. LOCK UNLOCK OUTPUTS
■ READ/WRITE I2C INTERFACE
■ HORIZONTAL MOIRE OR DAC OUTPUT