GENERAL DESCRIPTION
The ST6369 microcontroller is member of the 8-bit HCMOS ST638xfamily, a series of devicesspecially oriented to Digital Controlled Multi Frequency Monitor applications. ST6369 members are based on a building block approach: a common core is surrounded by a combination of on-chip peripherals (macrocells)available from a standardlibrary. These peripherals are designed with the same Core technology providing full compatibility and short design time. Many of these macrocells are specially dedicated to DCMF Monitor applications.

■ 4.5 to 6V supply operating range
■ 8MHz Maximum Clock Frequency
■ User Program ROM: 7948 bytes
■ Reserved Test ROM: 244 bytes
■ Data ROM: user selectable size
■ Data RAM: 256 bytes
■ Data EEPROM: 384 bytes
■ 40-Pin Dual in Line Plastic Package
■ Up to 23 software programmable general purpose Inputs/Outputs, including 2 direct LED driving Outputs
■ Two Timers each including an 8-bit counter with a 7-bit programmable prescaler
■ Digital Watchdog Function
■ Serial Peripheral Interface (SPI) supporting S-BUS/ I2C BUS and standard serial protocols
■ One 14-Bit PWM D/A Converter
■ Six 6-Bit PWM D/A Converters
■ One A/D converter with 0.5V resolution
■ Five interrupt vectors (HSYNC/NMI, Timer 1 & 2, VSYNC, PWR INT.)
■ On-chip clock oscillator
■ ST6369 is supported by pin-to-pin EPROM and
■ OTP versions.
■ The development tool of the ST6369 microcontroller consists of the ST6369-EMU emulation and development system to be connected via a standard RS232 serial line to an MS-DOS Personal Computer.