[Features]
• Our pink antistatic bags are blow-molded with anti static
additives from LDPE and LLDPE
• Soft texture and flexible
• Surface resistance of 108~1011Ω
• Static release time is >2 secs
Pink anti static bags have the ability to dissipate a static charge to ground preventing static charge building up on the package
or device. The material is also antistatic and will not charge up when rubbed against other materials.
Note, these bags have no shielding ability. A static field or discharge occurring outside the bag will penetrate the bag and
damage electronics inside.
Additional Notes
Recommend that all of our pink anti static bags be used within 2 years from the date of manufacture. Store this product in its
original packaging in a climate-controlled environment where temperature ranges from 21°C to 23°C and relative humidity is
45% to 50%.
Configuration(s):
Bags are offered with a bottom fold and two hot seals to each side.
Standard Bag Artwork:
Pink antistatic bags are produced with the following sample artwork as standard. The bags come complete with artwork and
write on panel.
Test Conditions
The following results were taken under the following environmental test conditions: Temperature: 22°C / Humidity: 46%
Item: Test Standard: Result:
Film Composition N/A LDPE
Film Thickness Micron Meter 75 micron (±8%) (where applicable)
Melt Index GB3682 2.1 g/10min
Surface Resistivity GB3682 <1010Ω/sq