Features
Desk top electronic instrument enclosure, ideally suited for mounting printed circuit
boards.
Standard versions are molded from flame retardant ABS plastic (material carries a UL
flammability rating of 94V-0).
Economy versions are molded from general purpose ABS plastic (UL94-HB).
Two piece construction. Integral card guides accept 1.5 mm (0.062”) P.C. cards. 0.20”
diameter stand off bosses in the base for supporting various subassemblies.
Integral brass bushings with four M3 x 0.5” x 8 mm (0.31”) Phillips pan head screws hold
recessed panel into sloping front of case.
1.01 mm (0.04”) aluminum panel with paper on one side.
Four self-adhesive feet included.
Stocked in black and grey.