• Second-generation increased current capacity
• VIN_Bulk input supply range: 4.25 V to 5.5 V
• Three step-down switching regulators: SWA, SWB and SWC
• Programmable dual-phase and single-phase
regulator for SWA and SWB
• Two LDO regulators: VOUT_1.8V and VOUT_1.0V
• Error injection capability
• Persistent error log registers
• Secure mode and programmable mode of operation
• Independently programmable output voltages,
power-up and power-down sequence for switch regulators
• Output power-good status reporting mechanism
• VIN_Bulk input supply protection feature: Input over
voltage and input under voltage
• Output switch regulators protection features: Output
over voltage, output under voltage, and output current limiter
• Output current and power measurement, output
current threshold mechanism
• Temperature measurement, temperature warning
threshold, critical temperature shutdown
• Multi Time Programmable (MTP) Non-Volatile Memory (NVM)
• Programmable and DIMM specific registers for customization
• General Status Interrupt (GSI) function
• Flexible Open-Drain IO (I2C) and Push-Pull (I3C Basic) IO support
• Flexible mechanism to enable switch regulators
(with VR_EN pin or VR Enable command on I2C or I3C Basic interface)
• Quiescent Power State (P1 State)
• Acoustic Noise Prevention Control
• Non-Volatile Serial Number storage