KEY FEATURES
> Features an asymmetric beam with optics set at a 3° tilt, helping to reduce glare
and focus the light where needed
> New high-power P1 engine with CREE COB delivering upto 1375lm at 500mA in 3000K
> E3 engine with NICHIA LED delivering up to 631lm at 700mA in 3000K offering an
exceptional 10° extra narrow beam with peak intensity reaching 13,539cd
> N1 engine with CREE COB delivering up to 851lm at 700mA in 3000K offering a
14° narrow beam
> LD154TDO for drive over applications with thickened bezel and dedicated concrete
housing to prevent rotation of the fitting
> Utilises large 50mm low glare optics, chosen for efficiency, quality of beam and
ability to produce narrow beams at high outputs
> Contains our integral moisture guard (anti-wicking barrier),
stopping water ingress from going up the cable into the product
from incorrect IP-rated connections
> Chamfered bezel available in 316 Stainless Steel, Polished & Passivated Stainless
Steel and a wide range of powder coat paint finishes or any RAL colour
> Switched, 0-10V, Casambi, DMX, DALI, or Mains dimmable drivers available