Features
+5V single supply
4 settingsofoutput frequency can set by 2 pins
 50Hz constant frequency sine-wave
 60Hz constant frequency sine-wave
 0-100Hzadjustable frequency sine-wave
 0-400Hz adjustable frequency sine-wave
2 modulation modes can set by1 pin
 Unipolar modulation
 Bipolar modulation
4 settings of dead time can set by 2 pins
 300nS
 500nS
 1.0uS
 1.5uS
External 12MHz crystal oscillator
23.4KHz Modulation frequency
Output Voltage Current Temperature detect and handle
3 seconds soft start can select by 1 pin
USART communication support
Voltage Current Temperature Frequency Display support by external LCD
Parameters and functions customize support

Description
EG8010 is a digital pure sine wave inverter ASIC (Application Specific Integrated Circuit) with
complete function of built-in dead time control. It applies to DC-DC-AC two stage power converter
system or DC-AC single stage low power frequency transformer system for boosting. EG8010 can
achieve 50/60Hz pure sine wave with high accuracy, low harmonic and distortion by external
12MHz crystal oscillator. EG8010 is a CMOS IC that integrates SPWM sinusoid generator, dead
time control circuit, range divider，soft start circuit, circuit protection, RS232 serial communication,
12832 serial LCD unit, and etc.

Application
Single-Phase sinusoid inverter
Solar power generation inverter
Wind power generation inverter
UPS(Uninterruptible power supply)
Digital Generator
Medium frequency power supply
Single-phase motor speed controller
Single-phase frequency transformer