Key performance specifications
• 1 or 2 channel models
• Output amplitude range 1 mVP-P to 10`VP-P into 50`Ω loads
• Basic (AFG) mode:
• 25 MHz, 50 MHz, 100 MHz, 150 MHz, or 250 MHz sine
waveforms
• 250 MSa/s, 1 GSa/s or 2 GSa/s sample rates
• 14-bit vertical resolution
• Built-in waveforms include sine, square, ramp, pulse, noise, and
other frequently used waveforms
• Sweep, Burst, and Modulation modes (AM, FM, PM, FSK, and
PWM)
• Advanced (Sequence) mode:
• Continuous mode (optional Sequence, Triggered and Gated
modes)
• 16 Mpts arbitrary waveform memory on each channel (128 Mpts
optional)
• Up to 256 steps in sequence mode with loop, jump and wait
events
• Variable sampling clock 1 µSa/s to 2 GSa/s

Key features
• Patented InstaView™ technology enables engineers to see the
actual waveform at the Device Under Test (DUT) in real time,

without the need of an oscilloscope and probe, eliminating the
uncertainty caused by mismatched impedance
• Sequencing option adds the ability to program long, complex
waveforms with up to 256 steps
• The 9-inch capacitive touch screen works like a smart phone and
has short-cuts to frequently used settings
• Built-in ArbBuilder lets you create and edit arbitrary waveforms on
the instrument, eliminating the need to connect to a PC
• Outputs are protected from over voltage and current to minimize
potential instrument damage
• Built-in Double Pulse Test application to generate voltage pulses
with varying pulse widths onto the DUTs

Applications
• Advanced research
• Clock and system synchronization
• Replication of real world signals
• Component and circuit characterization and validation
• Embedded circuit design and test
• General purpose signal generation
• Double pulse test