1 Features
• AEC Q-100 qualified:
– Device temperature grade 1: –40°C to +125°C
• Functional Safety-Capable:
– Documentation available to aid functional safety
system design
• LVCMOS output oscillator supporting frequency
range from 250kHz to 200MHz
• Supply voltage supports 1.8V to 3.3V ±10%.
• Very low power consumption: 4.57mA typical and
7.9mA maximum for 25MHz at 1.8V
• Stand by current 1.5μA typical at 1.8V helps for
battery powered applications
• Low jitter: < 750fs RMS jitter for Fout ≥ 10MHz
• Smallest industry wettable flank standard package:
1.60mm × 1.20mm (DLY), 2.00mm × 1.60mm
(DLR), 2.5mm × 2.00mm (DLF), 3.20mm × 2.5mm
(DLN)
– Universal land pattern footprint under
Mechanical, Packaging, and Orderable
Information
• Integrated LDO for robust supply noise immunity
• Start-up time < 3ms
– Contact TI for different start-up times.
• Orderable options for slow rise and fall time for
EMI reduction
• Supported frequencies (MHz):
– 1.2, 2.048, 4, 5.12, 6.78, 8, 8.192, 10, 12,
12.288, 16, 19.2, 20, 24, 24.576, 25, 26, 27, 30,
33.33, 33.333, 38.4, 40, 48, 50, 66.666, 76.8,
100, 125, 156.25, and more
• Contact TI representative for any frequency and
samples needed.

2 Applications
• Crystal oscillator replacement
• FPGA, MCU, Processor and ASIC clocking
• Automotive infotainment and cluster, Head Units,
Digital cockpit controllers, telematics
• ADAS, Automotive Camera, Sensor fusion,
automotive radar, ECU
• Automotive Gateway, Body Control Modules

3 Description
Texas Instruments' high-precision Bulk-Acoustic Wave
BAW) micro-resonator technology is integrated
directly into a package allowing for low jitter clock
circuitry. BAW is fully designed and manufactured
at TI factories like other silicon-based fabrication
processes.
The CDC6Cx-Q1 device is a low jitter, low power,
fixed-frequency oscillator which incorporates the BAW
as the resonator source. The device is factoryprogrammed
per specific frequency and function pin.
With a frequency control logic and output frequency
divider, the CDC6Cx-Q1 is capable of producing any
frequency within the specified range providing a single
device family for all frequency needs.
The high-performance clocking, mechanical stability,
lower power consumption, flexibility, and small
package options for this device are designed for
reference clock and core clocks in automotive
applications.