Brief description
The DICON touch is a universal process and program controller with 4 control channels, which
displays information on a vibrant display and is operated intuitively with touchscreen.
Up to 4 control channels are available via the tried-and-tested JUMO control algorithm with two
possible optimization variants. These enable a simple and highly-accurate startup. Even multiple-
zone control, cascade control, or other complex control tasks are therefore possible.
In the following block diagram, the various hardware options of the modular hardware concept
are depicted. 4 analog universal inputs and up to 8 external inputs can acquire a variety of physical
measured values with high precision. Thanks to different output variants, the actuators can
be controlled directly in the device, either in an analog manner or digitally. These can be expanded
further through external digital outputs. To communicate with higher-level systems, interfaces
such as Modbus (master/slave), PROFIBUS, PROFINET-RT, or Ethernet with web server, can
be used.
To ensure secure process operation, the device has password-protected user administration with
individual assignment of rights for different levels or control commands. Screen masks for controllers,
program generators, recording, and for overview screens are ready-made and available.
Four individual process screens can be created as desired using the configuration software. Important
analog and digital process values can be saved in a tamper-proof manner with the recording
extra code, visualized graphically, and exported to PC in a tamper-proof manner via
interface or USB flash drive.
The configuration software allows for the process controller to be programmed with ease, for
math and logic coherences to be described, and for customer-specific linearizations to be created.
Additionally, tools are included for simulating external signals or the control process, or to record
for the duration of the startup.
A comprehensive alarm and limit value concept as well as flexible digital signal management
complete the "all-in-one device".

Special features
• Vibrant 3.5-inch color screen,
with 320 × 240 pixels and 256 colors
• 32 programs with easy-to-use program entry
and program control
• Interfaces as a standard feature: USB host,
USB device, RS485 (COM1)
• Available as an interface (COM2):
RS422/485 Modbus master/slave, PROFIBUS-
DP, Ethernet, PROFINET-RT
• Integrated paperless recorder with tamperproof
data storage
• 4 individual process screens with user configurable
input fields
• 16 math and logic functions
• Flexible through modular hardware
• Password-protected user administration5-
digit analog value display
• Individual operating level
• Control loop and output level monitoring
• Integrated timer and time switch Service
and operating hours counter
• Web server for online visualization via a
web browser
• Alarm by email
• Protection type on the front, IP66
• AMS2750/CQI-9 calibration certificate
• cULus, DNV GL, DIN EN14597 approval