Features
 Integrates with USB Type-C
TM multiplexer & configuration channel (CC) logic
 Supports TRIM to the SSD
 Complies with PCI Express Base Specification Revision 3.1a
 Complies with NVM Express 1.3
 Complies with USB 3.1 Gen 1 and Gen 2 Specification, USB Mass Storage Class, Bulk-Only Transport
Specification (Revision 1.0)
 Complies with USB Attached SCSI Protocol (UASP) Specification (Revision 4)
 Supports USB Super-Speed/High-Speed/Full-Speed Operation
 Supports USB2.0/USB 3.1 Gen 1/2 power saving mode
 Supports external SPI NVRAM for Vendor VID/PID of USB2.0/USB 3.1 Gen 1/2 device controller
 Thirteen GPIOs for customization
 Provides hardware controlled PWMs
 Provides software utilities for downloading the upgraded firmware code under USB2.0/USB 3.1 Gen1,2
 Design for Windows 7, Windows 10 and MAC 10.10.5 or later version
 Support SCSI / NVMe Pass-through command to allow an application client to transmit a NVMe command to a
NVMe device.
 Supports 25MHz external crystal
 Supports 3.3V I/O
 Embedded 5V to 1.0V voltage regulator
 Embedded 5V to 3.3V linear voltage regulator (LDO)
 QFN64 8x8 package