DESCRIPTION

The HCF4066B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. The HCF4066B is a QUAD BILATERAL SWITCH intended for the transmission or multiplexing of analog or digital signals.

■ 15V DIGITAL OR ± 7.5V PEAK TO PEAK SWITCHING

■ 125Ω TYPICAL ON RESISTANCE FOR 15V OPERATION

■ SWITCH ON RESISTANCE MATCHED TO WITHIN 5Ω TYP. OVER 15V SIGNAL INPUT RANGE

■ ON RESISTANCE FLAT OVER FULL PEAK TO PEAK SIGNAL RANGE

■ HIGH ON/OFF OUTPUT VOLTAGE RATIO : 65dB TYP. at fIS = 10KHz, RL = 10KΩ

■ HIGH DEGREE OF LINEARITY : < 0.5% DISTORTION TYP. at fIS = 1KHz, VIS = 5 Vpp,VDD - VSS > 10V, RL = 10KΩ

■ EXTREMELY LOW OFF SWITCH LEAKAGE RESULTING IN VERY LOW OFFSET CURRENT AND HIGH EFFECTIVE OFF RESISTANCE : 10pA TYP. at VDD - VSS = 10V, Tamb = 25°C

■ EXTREMELY HIGH CONTROL INPUT IMPEDANCE (control circuit isolated from signal circuit 1012Ω typ.)

■ LOW CROSSTALK BETWEEN SWITCHES : 50dB Typ. at fIS = 0.9MHz, RL = 1KΩ

■ MATCHED CONTROL - INPUT TO SIGNAL OUTPUT CAPACITANCE : REDUCES OUTPUT SIGNAL TRANSIENTS

■ FREQUENCY RESPONSE SWITCH ON : 40MHz (Typ.)

■ QUIESCENT CURRENT SPECIF. UP TO 20V

■ 5V, 10V AND 15V PARAMETRIC RATINGS

■ INPUT LEAKAGE CURRENT

II = 100nA (MAX) AT VDD = 18V TA = 25°C

■ 100% TESTED FOR QUIESCENT CURRENT

■ MEETS ALL REQUIREMENTS OF JEDEC JESD13B ” STANDARD SPECIFICATIONS FOR DESCRIPTION OF B SERIES CMOS

DEVICES”