1 Features
• 0.2-inch (5.29-mm) Diagonal Micromirror Array
– 854 × 480 Array of Aluminum Micrometer-Sized
Mirrors, in an Orthogonal Layout
– 5.4-μm Micromirror Pitch
– ±17° Micromirror Tilt (Relative to Flat Surface)
– Side Illumination for Optimal Efficiency and
Optical Engine Size
• Highly Efficient Steering of NIR light
– Window Transmission Efficiency 96% Nominal
(700 to 2000 nm, Single Pass Through Two
Window Surfaces)
– Window Transmission Efficiency 90% Nominal
(2000 to 2500 nm, Single Pass Through Two
Window Surfaces)
– Polarization Independent Aluminum
Micromirrors
• Dedicated DLPC150/DLPC3470 Controllers for
Reliable Operation
– Binary Pattern Rates up to 2880 Hz
– Pattern Sequence Mode for Control over Each
Micromirror in Array
• Dedicated Power Management Integrated Circuit
(PMIC) DLPA2000 or DLPA2005 for Reliable
Operation
• 15.9-mm × 5.3-mm × 4-mm Body Size for Portable
Instruments

2 Applications
• Spectrometers (Chemical Analysis):
– Portable Process Analyzers
– Portable Equipment
• Compressive Sensing (Single Pixel NIR Cameras)
• 3D Biometrics
• Machine Vision
• Infrared Scene Projection
• Microscopes
• Laser Marking
• Optical Choppers
• Optical Networking

3 Description
The DLP2010NIR digital micromirror device (DMD)
acts as a spatial light modulator (SLM) to steer nearinfrared
(NIR) light and create patterns with speed,
precision, and efficiency. Featuring high resolution
in a compact form factor, the DLP2010NIR DMD
is often combined with a grating single element
detector to replace expensive InGaAs linear arraybased
detector designs, leading to high performance,
cost-effective portable NIR Spectroscopy solutions.
The DLP2010NIR DMD enables wavelength control
and programmable spectrum and is well suited for
low power mobile applications such as 3D biometrics,
facial recognition, skin analysis, material identification
and chemical sensing. ™