1 Features
• 7-V to 36-V supply voltage
• PNP, NPN or IO-Link configurable output
– IEC 61131-9 COM1, COM2 and COM3 Data
Rate Support
• Functional safety-capable
– Documentation available to aid in functional
safety system design
• Pin-compatible with TIOL111(x) with improved
performance
– Low residual Voltage of 0.5 V (typical) at
200 mA
– Active driver current limiting capability
– Improved thermal performance of the package
– Slower driver slew rates to reduce overshoots:
maximum of 750 ns
• Integrated protection features for robust systems
– Configurable driver overcurrent limit:
50 mA to 350 mA
– Active reverse polarity protection of up to 65
on L+, CQ and L-
– Fault indicator for overcurrent, overtemperature
and UVLO faults
– Safe and fast demagnetization of inductive
loads
– Extended ambient temperature operation:
–40°C to 125°C
• Integrated EMC protection on L+ and CQ
– ±8 kV IEC 61000-4-2 ESD contact discharge
– ±4 kV IEC 61000-4-4 electrical fast transient
– ±1.2 kV/500 Ω IEC 61000-4-5 surge
• Large capacitive load driving capability
• < 2-μA CQ leakage current
• < 1.5-mA quiescent supply current
• Integrated LDO options for up to 20 mA current
– TIOL1123: 3.3-V LDO
– TIOL1125: 5-V LDO
– TIOL1123L (YAH): Selectable 3.3-V/5-V Output
• Remote wake-up indication and wake-up
generation
• Small space-saving package options
– 3 mm x 3 mm 10-pin VSON package:
pin-compatible with TIOL111
– 2.45 mm x 1.7 mm DSBGA package

2 Applications
. Field Transmitters and actuators
. Factory automation
. Process automation
. IO-link PHY in remote IO

3 Description
The TIOL112(x) family of transceivers implements the
IO-Link interface for industrial bidirectional, point-topoint
communication. When the device is connected
to an IO-Link master through a three-wire interface,
the master initiates communication and exchange
data with the remote node while the TIOL112(x) acts
as a complete physical layer for the communication.
These devices are capable of withstanding up to
1.2 kV (500 Ω) of IEC 61000-4-5 surge and feature
integrated reverse polarity protection. A simple pinprogrammable
interface allows easy interfacing with
the controller circuits. The output current limit can
be configured using an external resistor. TIOL112(x)
can be configured to generate wake-up pulse and be
used in IO-link master applications. Fault reporting
and internal protection functions are provided
for undervoltage, overcurrent and overtemperature
conditions.