Features
■ Two 5V voltage regulators for microcontroller
and peripheral supply
■ No electrolytic capacitor required on regulator
outputs
■ Ultra low quiescent current in standby modes
■ Programmable reset generator for power-on
and undervoltage
■ Configurable window watchdog and fail safe
output
■ LIN 2.1 compliant (SAEJ2602 compatible)
transceiver
■ Advanced HS CAN transceiver (ISO 11898-2/-
5 and SAE J2284 compliant) with local failure
and bus failure diagnosis
■ HS CAN transceiver supports partial
networking
■ Complete 3 channel contact monitoring
interface with programmable cyclic sense
functionality
■ Programmable periodic system wake up
feature
■ ST SPI interface for mode control and
diagnosis
■ 5 fully protected high-side drivers with internal
4-channel PWM generator
■ 2 low-side drivers with active zener clamping
■ 4 internal PWM timers
■ 2 operational amplifiers with rail-to-rail outputs
(VS) and low voltage inputs
■ Temperature warning and thermal shutdown