1 Features
• AEC-Q100 Qualified for automotive applications:
– Temperature grade 1:
–40°C to +125°C, TA
• Integrated MOSFET for buck, buck-boost and
boost topology
– Wide input voltage: 4.5V to 65V
– Integrated 5.2A and 150mΩ MOSFET
– Switching frequency 100kHz to 2.2MHz
– Spread spectrum for lower EMI
• High precision power FET dimming
– Up to 4A output current in buck topology
– Analog dimming (dimming ratio 256 :1)
– Fast PWM dimming (150ns pulse width)
– Hybrid and flexible dimming
• Full protection features:
– Fault output
– LED open and short protection
– Cycle-by-cycle current limit
– Switching FET failure protection
– Thermal shutdown
– Configurable thermal foldback curve

2 Applications
• Automotive infotainment
• Automotive instrument clusters
• Heads-up displays(HUD)
• Automotive lighting

3 Description
The LP8868-Q1 family is a non-synchronous multitopology
solution with 4.5V to 65V wide input range.
By integrating the low-side NMOS switch, the device
is capable of driving LEDs with high power density
and high efficiency. The family also supports common
cathode connection and single layer PCB design. The
switching frequency is configurable from 100kHz to
2.2MHz with an optional spread spectrum feature for
better EMI performance.
The LP8868-Q1 family supports four dimming options,
including analog, PWM, hybrid and flexible dimming.
Each dimming method can be configured through
the PWM and ADIM input pins by means of simple
high and low signals. The family adopts an adaptive
off-time current mode control along with smart and
accurate sampling to enable inductive fast dimming
(IFD) and achieve high dimming accuracy.
The LP8868-Q1 family also provides multiple
systematic protections, including LED open and short,
sense resistor open and short, configurable thermal
foldback and thermal shutdown. Fault output will
send out acknowledge signals as soon as any fault
condition is detected.