B2980A Series Key Features
–– 0.01 fA (10-17 A) minimum measurement resolution and 2 pA to 20 mA current
–– measurement ranges with 6.5 digits resolution
–– < 20 μV burden voltage in its lowest current range
–– High speed reading rate up to 20,000 rdg/s
–– Battery operation models for line noise free measurements1
–– Built-in ± 1,000 V voltage source2
–– Measurement resistances up to 10 PΩ (1016 Ω)2
–– > 200 TΩ input impedance for up to 20 V voltage measurement2
–– Independent current and voltage measurement2
–– Charge measurement down to 2 nC range with 6.5 digits resolution2
–– Temperature and humidity measurements2
–– Graphical viewing modes (Meter, Graph, Histogram and Roll View)
–– Easy-to-use auto navigation to select optimal range and aperture
–– Optional Test Setup Integrity Checker function for noise source isolation
–– Versatile interface (USB 2.0: LAN, GPIB, LXI Core)
–– USB (front): store data, save/recall setup information
–– Free PC control software

Application Examples
–– Material science (Biomaterials, ceramics, elastomers, films, dielectric materials, electrochemical, ferroelectric materials, graphene, metals, organic materials, nanomaterials, polymers, semiconductors, etc.)
–– Devices & electronic components (capacitors, resistors, diodes, sensors, transistors including TFT and CNT, optoelectronics, solar cells, etc.)
–– Electronic/non-electronic systems (ion beam, electron beam, sensing systems, particle measurements, embedded precision instruments, etc.)