1FEATURES
2(Typical 5V Supply, Unless Otherwise Noted)
• Input Referred Voltage Noise 5.8 nV/√Hz
• Input Bias Current 100 fA
• Gain Bandwidth Product 88 MHz
• Supply Current per Channel
– LMV793 1.15 mA
– LMV794 1.30 mA
• Rail-to-Rail Output Swing
– @ 10 kΩ Load 25 mV from Rail
– @ 2 kΩ Load 45 mV from Rail
• Ensured 2.5V and 5.0V Performance
• Total Harmonic Distortion 0.04% @1 kHz, 600Ω
• Temperature Range −40°C to 125°C

APPLICATIONS
• ADC Interface
• Photodiode Amplifiers
• Active Filters and Buffers
• Low Noise Signal Processing
• Medical Instrumentation
• Sensor Interface Applications

DESCRIPTION
The LMV793 (single) and the LMV794 (dual) CMOS
input operational amplifiers offer a low input voltage
noise density of 5.8 nV/√Hz while consuming only
1.15 mA (LMV793) of quiescent current. The
LMV793/LMV794 are stable at a gain of 10 and have
a gain bandwidth product (GBW) of 88 MHz. The LMV793/LMV794 have a supply voltage range of
1.8V to 5.5V and can operate from a single supply.
The LMV793/LMV794 each feature a rail-to-rail
output stage capable of driving a 600Ω load and
sourcing as much as 60 mA of current.
The LMV793/LMV794 provide optimal performance in low voltage and low noise systems. A CMOS input
stage, with typical input bias currents in the range of
a few femto-Amperes, and an input common mode
voltage range, which includes ground, make the
LMV793/LMV794 ideal for low power sensor
applications where high speeds are needed.
The LMV793/LMV794 are manufactured using TI’s advanced VIP50 process. The LMV793 is offered in
either a 5-Pin SOT23 or an 8-Pin SOIC package. The
LMV794 is offered in either the 8-Pin SOIC or the 8-
Pin VSSOP.