Wide Operating Voltage Range of 2 V to 6 V
Outputs Can Drive Up To 15 LSTTL Loads
Low Power Consumption, 80-μA Max ICC
Typical tpd = 11 ns
±6-mA Output Drive at 5 V
Low Input Current of 1 μA Max

description/ordering information
These data selectors/multiplexers contain inverters and drivers that supply full data selection to the four output
gates. A separate strobe (G) input is provided. A 4-bit word is selected from one of two sources and is routed
to the four outputs. The ’HC158 devices’ outputs provide inverted data.