|
Members of the Texas Instruments
SCOPE E Family of Testability Products
Octal Test-Integrated Circuits
Functionally Equivalent to ’F240 and
’BCT240 in the Normal-Function Mode
Compatible With the IEEE Standard
1149.1-1990 (JTAG) Test Access Port and
Boundary-Scan Architecture
Test Operation Synchronous to Test
Access Port (TAP)
Implement Optional Test Reset Signal by
Recognizing a Double-High-Level Voltage
(10 V) on TMS Pin
SCOPE E Instruction Set
– IEEE Standard 1149.1-1990 Required
Instructions, Optional INTEST, CLAMP,
and HIGHZ
– Parallel-Signature Analysis at Inputs
– Pseudo-Random Pattern Generation
From Outputs
– Sample Inputs/Toggle Outputs
Package Options Include Plastic
Small-Outline (DW) Packages, Ceramic
Chip Carriers (FK), and Standard Plastic
and Ceramic 300-mil DIPs (JT, NT)
description
The ’BCT8240A scan test devices with octal
buffers are members of the Texas Instruments
SCOPEE testability integrated-circuit family. This
family of devices supports IEEE Standard
1149.1-1990 boundary scan to facilitate testing of
complex circuit-board assemblies. Scan access
to the test circuitry is accomplished via the 4-wire
test access port (TAP) interface.
In the normal mode, these devices are functionally equivalent to the ’F240 and ’BCT240 octal buffers. The test
circuitry can be activated by the TAP to take snapshot samples of the data appearing at the device terminals
or to perform a self test on the boundary-test cells. Activating the TAP in normal mode does not affect the
functional operation of the SCOPEE octal buffers.
In the test mode, the normal operation of the SCOPEE octal buffers is inhibited and the test circuitry is enabled
to observe and control the I/O boundary of the device. When enabled, the test circuitry can perform
boundary-scan test operations, as described in IEEE Standard 1149.1-1990.
|