The 9x60A-DST is a bench-top, 2U, half 19" rack size,
fully metal case, single or dual channel DC coupled
wideband amplifier designed for high frequency, high
current, signal amplification. While target applications
include piezo-electronics, transducer characterization,
MEMS, general electronics and scientific applications,
with a high bandwidth of 45MHz, 34Vp-p into 50 ohms
and up to 10W output power and a peak output current
of 1A, the 9x60A-DST is the ideal complimentary
amplifier to any signal source that needs a supporting
power boost for demanding applications.


Instrument Configuration
The 9x60A-DST can be configured to be used
as two, single-ended independent channels,
or as a one input with two differential outputs.
The 9x60A's standard configuration enables
a maximum output voltage of 34Vp-p into 50
ohms with a gain of x10. Other custom gain,
such as x15 can be ordered at the time of the
purchase, enabling clients’ even wider variety
of choices to solve their application.

Input Characteristics
There are three inputs for each channel:
1. Main input, which is located on the front panel
and is normally used for signal inputs.
2. Auxiliary input, which is located on the rear
panel and can be used as a summing input.
3.DC Offset input, which is located on the rear
panel and can be used for offsetting signal
level within the specified output level window.

Output Characteristics
The outputs are located on the front panel. There
are two outputs, one for each channel. When
the 9x60A-DST is configured as two separate
amplifiers, the outputs generate amplified signals
within the range of 34Vp-p into matching load
impedance at approximately 45MHz bandwidth.

Auxiliaries
The 9x60A-DST has two additional inputs
for each channel allowing summation of two
signals and providing an external control of DC
level offset. These inputs are accessible from
the rear panel only.