Benefits and Features
High performance sensor at a competitive price
Three year extended warranty available on this product
Sensor design minimises airflow disruption at measurement volume
Simple field calibration using optional calibration kit
Low power - suitable for remote application
Automatic status check for faults or window contamination
Incorporates automatic dew and hood heaters for allweather operation
Madein UK
Type certified for Aviation use by the German Meteorological Service, Deutscher Wetterdienst (DWD)

Technical Description
The CS125 uses the well-established forward scatter system for visibility measurement, using a 42° scatter angle, which gives accurate estimates of Meteorological Observable
Range (M.OR) for fog and snow.
It identifies precipitation particles from their scattering properties and fall speeds, and combines this with a temperature measurement to identify the weather type. It has downward-pointing optics that reduce the risk of contamination of the optics and blockage with snow.
Interference to the sample volume from the sensor by flow distortion or heat is minimized. It also provides reliable present weather information in the form of SYNOP codes, including information on the intensity of precipitation. Accumulation can also be reported.
The CS5125 uses continuous high-speed sampling to reduce errors during mixed-weather events and events that return intermittent signals, such as rain and hail, while still providing reliable readings during more stable events, such as fog and mist. The C5125 has high immunity to interference from the visible and infrared warning lights used to mark obstructions, such as wind turbines.
The sensor can be set to a lower sampling frequency to save power, if required.
The CS125 incorporates low-power dew prevention heaters, as well as higher-power anti-icing heaters for the hoods as standard. These heaters are automatically controlled to ensure operation in all weather, or they can be disabled individually to save power.
The CS125 continuously monitors its own status and will report internal faults and contamination or blockage of the sensor lenses. It also has two user-configurable alarm outputs that can be used to drive audio or visual alarms using solid-state relays.
The CS125 is certified by Deutscher Wetterdienst as suitable for use to control wind turbine obstruction light systems as specified by 506/04, General Administrative Rules for the Identification of Aircraft Obstructions.