Features
Standard SPI: SCLK, /CS, SI, SO, /WP, /HOLD
Dual SPI: SCLK, /CS, IO0, IO1, /WP, /HOLD
Quad SPI: SCLK, /CS, IO0, IO1, IO2, IO3
2.Read
Normal Read (Serial): 50MHz clock rate
Fast Read (Serial): 108MHz clock rate
Dual/Quad (Multi-I/O) Read: 108MHz clock rate
3.Program
Serial-input Page Program up to 256bytes
Program Suspend and Resume
4.Erase
Block erase (64/32 KB)
Sector erase (4 KB)
Chip erase
Erase Suspend and Resume
5.Program/Erase Speed
Page Program time: 0.7ms typical
Sector Erase time: 60ms typical
Block Erase time: 0.3/0.5s typical
Chip Erase time: 4s typical
6.Flexible Architecture
Sector of 4K-byte
Block of 32/64K-byte
7.Low Power Consumption
20mA maximum active current
5uA maximum power down current
8.Software/Hardware Write Protection
3x256-Byte Security Registers with OTP Lock
Enable/Disable protection with WP Pin
Write protect all/portion of memory via software
Top or Bottom, Sector or Block selection
9.Single Supply Voltage
Full voltage range: 2.7~3.6V
10.Temperature Range
Commercial (0℃ to +70℃)
Industrial (-40℃ to +85℃)
11.Cycling Endurance/Data Retention
Typical 100k Program-Erase cycles on any sector
Typical 20-year data retention at +55℃