Features
 Built-in re-timers
− Integrated re-timers for USB3.2 up to Gen 2 @ 10Gbps
− US3.2 Specification (Appendix-E) compliant re-timer
− Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB3.2 Specification (Appendix-E)
− Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps. Supports both transparent mode and non-transparent mode (transparent or LTTPR)
− Supports both host (source) and device (sink) applications in USB-C subsystems
− Loss compensation to recover up to 23dB channel loss (USB), up to 27dB (DP)
 Integrated mux
− Integrated (4x4) mux switches USB and DP signals and preserves enhanced signal output over USB-C connector
− Mux control input through I2C commands from external I2C master (or, optionally through GPIO of FLIP/USB_EN/DP_EN pins)
− Integrated SBU/AUX mux for switching DisplayPort AUX +/- signals
 Integrated reference clock
 Serial and debug interfaces
− I2C Slave interface, up to 1MHz, for mux and re-timer configuration
 Industry standard compatibility
− USB3.2 specification, Appendix E
− DisplayPort 1.4a specification
− USB Type-C r1.2 specification
− Intel USB3.2 Repeater and Active Switch specification
 Low-power design
− Analog power supply at 1.8V
− I/O power supply at 1.8V
− Core power supply at 1.2V
 Package
− QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
− LGA-34, 3.3mm x 4.8mm, 0.71mm Z-height, 0.35mm pin-pitch
 Commercial temperature range of 0C to 70C

Applications
Notebooks, desktops, gaming PCs, workstations, servers, 2-in-1 PCs, active cables and accessories