Features

4-lanes DisplayPort inputs with link speed of 1.62Gbps, 2.7Gbps, 5.4Gbps, 6.75Gbps, 8.1Gbps

USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) and Gen2 (10Gbps) link speed

DisplayPort Alternate Mode (SlimPort®) communication support through USB-PD structured VDM messaging

Native TCPC-compliant hardware register interface

Supports DFP and DRP modes for Host-only or Dual- Role applications

Integrated VCONN FETs

Built-in 10-bit ADC to monitor VBUS voltage and current

Dedicated control signals for VBUS Source FET, VBUS sink FET, and VBUS auto discharge circuity

Serial and debug interface
- Slave interface
- Direct Connect Interface (DCI) debug support

Industry standard compatibility
- USB Type-C r1.2 specification
- USB Power Delivery v3.0 r1.0 specification
- DisplayPort 1.4 specification
- DisplayPort Alternate Mode over USB Type-C r1.1 specification
- Universal Serial Bus (USB) Type-C Port Controller Interface r1.0 specification

Low-power design
- Single supply at 3.3V
- Dedicated supply power pin for flexible I/O power – 1.8V or 3.3V
- Ultra-low power consumption (typical 77uW) in standby mode

OCM to implement signal switching, USB-PD messaging, and DisplayPort related functions
- 64K bytes SRAM for firmware execution
- 128K bytes Flash for firmware storage
- PDFU function for firmware updating

Dead battery detection support

Packages
- BGA-49 3.2mm x 3.2mm, 0.91mm Z-height, 0.4mm pinpitch
- QFN-48 6mm x 6mm, 0.90mm Z-height, 0.4mm pinpitch

Applications
Notebooks, desktops, and 2-in-1s