Description
The Arduino® GIGA Display Shield is an easy way to add a touchscreen display with orientation detection to your Arduino® GIGA R1 WiFi board.

Features
Note: The GIGA Display Shield requires a GIGA R1 WiFi board to function. It has no microcontroller and cannot be
programmed independently.
KD040WVFID026-01-C025A 3.97" TFT Display
480x800 resolution
16.7 million colors
0.108 mm pixel size
Capacitive Touch sensor
5-point and gesture support
Edge LED backlight
BMI270 6-axis IMU (Accelerometer and Gyroscope)
16-bit
3-axis accelerometer with ±2g/±4g/±8g/±16g range
3-axis gyroscope with ±125dps/±250dps/±500dps/±1000dps/±2000dps range
SMLP34RGB2W3 RGB LED
Common Anode
IS31FL3197-QFLS2-TR Driver with integrated charge pump
MP34DT06JTR Digital Microphone
AOP = 122.5 dbSPL
64 dB signal-to-noise ratio
Omnidirectional sensitivity
–26 dBFS ± 3 dB sensitivity
I/O
GIGA Connector
2.54 mm Camera Connector