GENERAL DESCRIPTION
The AD8123 is a triple, high speed, differential receiver and equalizer that compensates for the transmission losses of UTP and coaxial cables up to 300 meters in length. Various gain stages are summed together to best approximate the inverse frequency response of the cable. Logic circuitry inside the AD8123 controls the gain functions of the individual stages so that the lowest noise can be achieved at short-to-medium cable lengths. This technique optimizes its performance for low noise, short-to-medium range applications, while at the same time provides the high gain bandwidth required for long cable equalization (up to 300 meters). Each channel features a high impedance differential input that is ideal for interfacing directly with the cable.

FEATURES
   Compensates cables to 300 meters for wideband video
   Fast rise and fall times
      4.9 ns with 2 V step at 150 meters of UTP cable
      8.0 ns with 2 V step at 300 meters of UTP cable
   55 dB peak gain at 100 MHz
   Two frequency response gain adjustment pins
      High frequency peaking adjustment (VPEAK)
      Broadband flat gain adjustment (VGAIN)
   Pole location adjustment pin (VPOLE)
      Compensates for variations between cables
      Can be optimized for either UTP or coaxial cable
   DC output offset adjust (VOFFSET)
   Low output offset voltage: 24 mV
   Compensates both RGB and YPbPr
   Two on-chip comparators with hysteresis
      Can be used for common-mode sync extraction
   Available in 40-lead, 6 mm × 6 mm LFCSP

APPLICATIONS
   Keyboard-video-mouse (KVM)
   Digital signage
   RGB video over UTP cables
   Professional video projection and distribution
   HD video
   Security video