1 Features
• ADC Channel
– Performance:
• Line differential input dynamic range: 100 dB
• Mic differential input dynamic range: 100 dB
• THD+N: –95 dB
– Input voltage:
• Differential, 2-VRMS full-scale inputs
• Single-ended, 1-VRMS full-scale inputs
– Configurable Digital HPF:
• 1 Hz(48KSPS Sample Rate)
• 12 Hz(48KSPS Sample Rate)
– Sample rate (fS) = 8 kHz to 192 kHz
– Low noise microphone bias
• – DAC Channel
• DAC performance:
– DAC to Line Out Dynamic Range: 106
dB
– DAC to HP Out Dynamic Range: 106 dB
– THD+N: –80 dB
• Head Phone/Line Out output voltage:
– Differential, 2-VRMS full-scale
– Pseudo-differential, 1-VRMS full-scale
– Single-ended, 1-VRMS full-scale
• DAC sample Rates (fs) = 8KHz to 192KHz
– Common Features
• Pin Control
• Audio Serial Interface
– Format: TDM, LJ or I2S
– Configurable TDM Slot
– Bus Controller and Target Modes
– Word Length: Selectable 16, 24 or 32
Bits
• Linear Phase Filter
• Auto Clock Detection and Configuration
• Low Power Modes
• Interrupt output
• Single Supply Operation AVDD: 1.8V or
3.3V
• I/O Supply Operation: 1.2V or 1.8V or 3.3V
• Temperature grade 1: –40°C ≤ TA ≤ +125°C

2 Applications
• Land Mobile Radio
• IP Network Camera
• IP Telephone
• Video Conference System
• Professional audio mixer/control surface

3 Description
The TAC5142 is a Stereo Codec with 2VRMS
differential Input, 100dB ADC and 2VRMS 106dB
Stereo DAC. The TAC5142 supports both differential
and Single Ended input and output. Device supports
both Microphone and Line In input on ADC Channel.
DAC Output can be configured for either Line
Out or Head Phone Load. The device integrates
a phase-locked loop (PLL), a DC removal highpass
filter (HPF) and supports sample rates up
to 192kHz. TAC5142 can drive upto 62 mW into
a Headphone Load. The TAC5142 supports timedivision
multiplexing (TDM), left-justified (LJ), or I2S
audio formats in controller and target mode, and
is pin controlled. These integrated high-performance
features, pin control along with a single supply
operation, make TAC5142 an excellent choice for
space-constrained audio applications.