■Features
1. Small Design
With a contact pitch of 1mm and mounted pitch of 0.5mm,
the mating face area is reduced by approximately 50%
when compared to existing Hirose half-pitch connectors.
(Fig.1)
2. Robust Design
The D-shaped shell design enhances prying force.
Through-hole mounting of the shell and retention tabs
increases PCB retention force.
3. Unique Contact Arrangement for IDC Termination
The stagerred 2 row IDC contact arrangement reduces
plug size. Additionally, the 2 types of press plates, white
and black, can be used to prevent mis-wiring.
4. Excellent Shielding for EMI Prevention
The plug is covered with a metal shield and the ground
can be dropped to the panel or board. (Fig. 2)
5. Wide Variation
Wide product range available including screw lock types,
one touch lock types and variations to accommodate an
array of panel thicknesses.
6. Applicable for High Speed Data Transmission
Twinaxial cabling enables high speed transmission.
(Varies based on cable length and board)