General Description
The RTQ2134 is a multi-phase, programmable power
management IC that integrates with four high efficient,
synchronous step-down converter cores. The
RTQ2134 can be 2 + 2 and 2 + 1 + 1 output by OTP. It
also features wide output voltage range and the
capability to configure the corresponding power stages,
which make the device optimized to meet power
management requirements for low-power processors,
such as core power for CPUs and GPUs. The
RTQ2134 supports many programmable functions
including voltage level, slew rate of voltage change,
and slew rate of soft-start via an I2C interface capable
of operating up to 3.4MHz. The RTQ2134 also
supports remote-sense function to get accurate output
voltage at large loading. Moreover, the device has
interrupt and fault-detection function to report error
status. The RTQ2134 is available in a WET-WQFN-30L
4.5x5 (FC) package.

Applications
⚫ Automotive Systems

Features
⚫ FMEA Compliant PinOut
⚫ AEC-Q100 Grade1 Qualified
⚫ 2 + 2 / 2 + 1 + 1 Phase Output
⚫ I2C Programmable Output Voltage : 0.3V to 1.85V
⚫ Maximum Output Current : Total 20A, 5.5A per
Phase
⚫ Output Remote Sense
⚫ Fast Transient Response
⚫ Input Supply Voltage Range : 3V to 6V
⚫ Selectable Automatic Phase Shielding and
Power Saving Mode Enables Higher Light Load
Efficiency
⚫ Dynamic Voltage Scaling (DVS) with
Programmable Slew Rate for Each Output
⚫ Programmable Soft-Start Function
⚫ Interrupt Function and Fault Detection
⚫ Watchdog Function
⚫ Input Under-Voltage Lockout (UVLO)
⚫ Cycle by Cycle Current Limit
⚫ Output Under-Voltage Protection
⚫ Over-Temperature Protection
⚫ WET-WQFN-30L 4.5x5 (FC)