The plug-in terminal strip 302-NFLP-DS, low version, is available in 8 mm pitch
with 2 to 12 poles.
It has one screw connection per pole and one vertical plug connection to a terminal
strip with pins.
Contact spring and wire protector form one unit. The wire protection reliably
prevents damage to flexible wires by the turning screw.
The funnel-shaped insertion bushings guarantee perfect pin guidance and optimum
contact protection.
The plug-in terminal strip 302-NSLP creates a plug connection where both terminal
strips are located on top of each other and therefore require little mounting space.
The leads remain in parallel position.
This arrangement does not allow for the connection of an earth lead.
These terminals strips can be screw-mounted on a substrate.