Features
• SPD5 Hub Device
• Two-wire programmable I2C or I3C Basic bus serial
interface
• Single device load on the Host bus
• Up to 12.5MHz transfer rate
• 1.8V power supply input
• 1.0V LDO output at VIO pin; Optionally can take
1.0V input power supply on VIO pin
• Supports 1.0V, 1.1V, 1.2V, and 1.8V Push-Pull IO
levels
• Supports 1.0V, 1.1V, 1.2V, 1.8V, 2.5V, and 3.3V
Open-drain IO levels
• 16 blocks of non-volatile memory; 64 bytes per
block
• Hub Function (a.k.a. Transparent Mode of
operation) with 3 address bit translation
• Integrated Temperature Sensor; 0.5°C Accuracy
with 0.25°C resolution
• Packet Error Check (PEC) Function
• Parity Error Check Function
• Bus Reset Function
• Up to 8 unique addressing
• Programmable I2C, I3C Basic Bus Addressing
Scheme
• In Band Interrupt (IBI) (Transparent Mode of
Operation)
• Write protection for each block of NVM
• 9-pin thermally enhanced DFN package
• Temperature: Industrial range of -40°C to 125°C