Product specification
• surface-mounted, unequipped module housing for individual modules in modul design
• solid steel sheet housing
• upper part of the housing powder-coated in RAL 9010
• upper part of the housing can be put on and removed easily because no screws are used for fastening
• equipotential bonding possible by means of contact pin
• additional strain relief on lower part of housing using cable ties
• suitable for direct wall mounting, as desktop device and for DIN-rail mounting using the DIN rail adapter mini FS
• bottom of the 3 port and 4 port housing can be removed. Additional fastening by means of 60 mm fastening clearance.
• optionally available and usable in all housings except 2 port: FO extension set for module and keystone surface mount housing: 130861-MSKE
• optionally available 2x12 housing: Strain relief for patch cords 130861-24ZE-E
• variants: 2, 3, 4, 6, 8, 12, 16 and 2x12 ports