Features

ESD Protection for 1 line with Uni-directional

Provide ESD protection for the protected line to
IEC 61000-4-2 (ESD) ±30kV (air/contact)
Cable Discharged Event (CDE)

For low operating voltage applications: 3.3V
maximum

0402 small DFN package saves board space

Protect one I/O line or one power line

Fast turn-on and Low clamping voltage

Solid-state silicon-avalanche and active circuit
triggering technology

Green Part

AEC-Q101 qualified
Applications

Automotive Applications

Computer Interfaces Protection

Microprocessors Protection

Serial and Parallel Ports Protection

Control Signal Lines Protection

Power lines on PCB Protection

3.3V operating systems
Description
AZ9513-01F is a design which includes a
uni-directional ESD rated clamping cell to protect
one power line, or one control line, or one low
speed data line in an electronic systems. The
AZ9513-01F has been specifically designed to
protect sensitive components which are
connected to data and transmission lines from
over-voltage caused by Electrostatic Discharging
(ESD), and Cable Discharge Event (CDE).
AZ9513-01F is a unique design which includes
proprietary clamping cells in a small package.
During transient conditions, the proprietary
clamping cells prevent over-voltage on the
control/data lines, protecting any downstream
components.
AZ9513-01F may be used to meet the ESD
immunity requirements of IEC 61000-4-2, Level 4
(±15kV air, ±8kV contact discharge).