Description
The HD404054 Series and HD404094 Series are HMCS400-series microcomputers designed to increase program productivity with large-capacity memory. Each microcomputer has three timers, one serial interface, comparator, input capture circuit.

Features
• The differences between HD404054 Series and HD404094 Series

    HD404054 Series
        I/O pins 10 large-current output pins: Six 15-mA sinks and four 10-mA sources

    HD404094 Series
        • 6 largecurrent output pins: Two 15-mA sinks and four 10-mA sources
        • 4 intermediate voltage output pins
• 27 I/O pins and 8 dedicated input pins
• Three timer/counters
• Eight-bit input capture circuit
• Two timer outputs (including two PWM outputs)
• One event counter inputs (including one double-edge function)
• One clock-synchronous 8-bit serial interface
• Comparator (2 channels)
• Built-in oscillators
    - Main clock: Ceramic or crystal oscillator (an external clock is also possible)
• Six interrupt sources
    - Two by external sources
    - Four by internal sources
• Subroutine stack up to 16 levels, including interrupts
• Two low-power dissipation modes
    - Standby mode
    - Stop mode
• One external input for transition from stop mode to active mode
• Instruction cycle time: 1 µs (fOSC = 4 MHz at 1/4 division ratio)
    - 1/4, or 1/32 division ratio can be selected by hardware
• Two operating modes
    - MCU mode
    - MCU/PROM mode (HD4074054, HD4074094)