Description
The X-NUCLEO-USBPDM1 is an expansion board for the NUCLEO-G071RB and NUCLEO-G474RE development boards or any STM32 Nucleo development board equipped with a USB Type-C peripheral. The X-NUCLEO-USBPDM1 is compliant with USB Type-C Rev 1.2 and Power Delivery 3.0 with 100 W PPS support, as well as USB-IF certified (Test ID certification: 3036). It provides a straightforward means for evaluating USB Type-C Power Delivery in Sink mode based on TCPP01-M12. The USB Type-C connector can supply the STM32 Nucleo development board thanks to a 3.3 V LDO. Product summary USB Type-C Power Delivery sink expansion board based on TCPP01-M12 for STM32 Nucleo X-NUCLEOUSBPDM1 USB Type-C software expansion for STM32Cube X-CUBE-TCPP USB type-C port protection TCPP01-M12 STM32 Nucleo-64 development boards with STM32G071RB/ STM32G474RE MCUs NUCLEOG071RB/ NUCLEOG474RE

Features
■ 100 W programmable power supply (PPS) support
■ USB Type-C reversible connector
■ 6 V overvoltage protection (OVP) on CC lines against short-to-VBUS when the connector is unplugged
■ Up to 22 V adjustable overvoltage protection (OVP) on VBUS line against charger failure
■ Surge protection and system-level ESD protection on VBUS
■ Common-mode filter and ESD protection on USB 2.0 High Speed data-lines
■ System-level ESD protection on CC lines as per IEC61000-4-2 level 4 (±8 kV contact discharge)
■ Low power mode for battery operation allows zero current consumption when no cable is attached
■ Integrated dead battery management for fully depleted battery devices
■ Overtemperature protection (OTP)
■ Compliant with USB Type-C Rev 1.2 and Power Delivery 3.0 standards
■ USB-IF certified (Test ID certification: 3036)