Features
■ NIOSH approved P95. At least 95% filtration efficiency against solid
■ and liquid aerosols including oils.1
■ Comfort. The uniquely designed 2076HF cartridge is lighter and easier to breathe through than cartridge/filter combinations.
■ Versatile protection. The 2076HF is well suited for a wide range of oil and non-oil based particulate contaminants, hydrogen fluoride and nuisance levels of acid gases.2
■ Economy. The 2076HF is attractively priced in comparison to filter/cartridge combinations.
■ Simplicity. The versatility of this filter reduces your inventory and training requirements.
■ Compatibility. The 2076HF can be used with 3M’s wide variety
■ of half and full facepieces.3
■ Durability. The unique flexible filter material resists abrasion and wetting. Filters are flame and water resistant. 2076HF, P95 Particulate/Hydrogen Fluoride Cartridge with Nuisance Level Acid Gas Relief 2 3035 page 1 of 2 3MTM 2076HF, P95 Particulate/Hydrogen Fluoride Cartridge References: 1. Tested against particles approximately 0.3 micron in size (mass median aerodynamic diameter) per 42 CFR 84. 2. 3M recommended for relief against nuisance level acid gas. Nuisance level refers to those concentrations below OSHA permissible exposure limits or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against acid gases, except Hydrogen Fluoride. 3. The 2076HF cartridge can be used as a stand-alone cartridge with 3M™ 6000, 7500, 7800 and Ultimate FX FF-400 Series Facepieces or as a prefilter with 3M™ 5000 Series Respirators and 6000 Series Cartridges (use with 502 adapter). Suggested Applications:
■ Aluminum
■ smelting
■ Glass Etching
■ Chemical manufacturing Issue Date 9/1/09 WARNING These filters help protect against certain particles. Misuse may result in sickness or death. Before use, the wearer must read and understand User Instructions provided as a part of product packaging. Time use limitations may apply. For proper use, see package instructions, supervisor or call 3M OH&ESD Technical Service in U.S.A., 1-800-243-4630. In Canada, call 1-800-267-4414. Additional use instructions, product limitations, approval labels, and warnings are included with each facepiece and filter package.