General Description 

The KS8999 contains eight 10/100 physical layer transceivers, nine MAC (Media Access Control) units with an integrated layer 2 switch. The device runs in two modes. The first mode is an eight port integrated switch and the second is as a nine port switch with the ninth port available through an MII (Media Independent Interface).

Features

• 9 port (8+1) 10/100 integrated switch with eight physical layer transceivers and one MII/SNI interface

• Advanced Ethernet Switch with internal frame buffer

―  128K Byte of SRAM on chip for frame buffering

―  2.0Gbps high performance memory bandwidth

―  Wire speed reception and transmission

―  Integrated address look-up engine, supports 1K absolute MAC addresses

―  Automatic address learning, address aging and address migration

• Advanced Switch Features

―  Supports 802.1p priority and port based priority

―  Supports port based VLAN

―  Supports 1536 byte frame for VLAN tag

―  Supports DiffServ priority, 802.1p based priority or port based priority o broadcast storm protection

• Proven transceiver technology for UTP and fiber operation

―  10BaseT, 100BaseTX and 100BaseFX modes of operation

―  Supports for UTP or fiber on all 8-ports

―  Indicators for link, activity, full/half-duplex and speed

―  Hardware based 10/100, full/half, flow control and auto-negotiation

―  Individual port forced modes (full duplex, 100BaseTX) when auto-negotiation is disabled

―  Full-duplex IEEE 802.3x flow control

―  Half-duplex back pressure flow control

• Supports MDI/MDI-X auto crossover

• External MAC interface (MII or 7-wire) for router applications

• Unmanaged operation via strapping or EEPROM at system reset time (see Reset Reference Circuit section)

• Comprehensive LED support

• Single 2.0V power supply with options for 2.5V and 3.3V I/O

• 900 mA (1.80W) including physical transmit drivers

• Supports both commercial and industry temperature

―  Commercial temperature range: 0°C to +70°C (KS8999)

―  Industrial temperature range: –40°C to +85°C (KS8999I)

• Supports lead free products:

―  Commercial temperature range: 0°C to +70°C (KSZ8999)

―  Industrial temperature range: –40°C to +85°C (KSZ8999I)

• Available in 208-pin PQFP package