Features
■ STM32H735IGK6U microcontroller featuring 1 Mbyte of Flash memory and 564 Kbytes of SRAM in UFBGA176+25 package
■ 4.3" TFT 480×272 pixels colored LCD module with capacitive touch panel and RGB interface
■ Ethernet compliant with IEEE-802.3-2002 and PoE (Power over Ethernet)
■ USB OTG FS
■ SAI audio codec
■ One ST-MEMS digital microphone
■ 512-Mbit Octal-SPI NOR Flash memory
■ 128-Mbit HyperRAM™
■ Two user LEDs
■ User and reset push-buttons
■ Fan-out daughterboard
■ Three CAN FDs
■ Board connectors: – USB FS Micro-AB – USB ST-LINK Micro-B – Ethernet RJ45 – Stereo headset jack including analog microphone input – Audio header for external speakers – microSD™ card – TAG connector 10-pin footprint – SMA connector – Arm® Cortex® 10-pin 1.27 mm-pitch debug connector over STDC14 footprint – ARDUINO® Uno V3 expansion connector – STMod+ expansion connector – Pmod™ Type-2A and Type-4A expansion connector – Audio MEMS daughterboard expansion connector
■ Flexible power-supply options: – STLINK-V3E USB connector – USB OTG FS connector – 5 V delivered by RJ45 (Power over Ethernet) – 5 V delivered by ARDUINO® – USB charger
■ On-board STLINK-V3E debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
■ Comprehensive free software libraries and examples available with the STM32CubeH7 MCU Package
■ Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil®, and STM32CubeIDE Discovery kit with STM32H735IG MCU STM32H735G-DK Data brief DB4159 - Rev 1 - April 2020 For further information contact your local STMicroelectronics sales office.