GENERAL DESCRIPTION
The ADuCM410 is a fully integrated, single package device that includes high performance analog peripherals together with digital peripherals (controlled by a 160 MHz Arm® Cortex™- M33 processor) and integrated flash for code and data.

FEATURES
   Analog input/output
      Multichannel, 16-bit, 2 MSPS ADC
         Up to 16 external channels
         On-chip die temperature monitor
         4 power monitor channels
         4 PGA/TIA channels supporting voltage and current
            measurements
         Fully differential and single-ended modes
         0 V to VREF analog input range
      12-bit voltage output DACs
         8× 0 V to 2.5 V, 1 kΩ load
         4× 0 V to 2.5 V, 2.5 kΩ load
      On-chip low drift voltage reference, 1.25 V or 2.5 V
         Buffered 1.25 V or 2.5 V output
      4 voltage comparators
   Microcontroller
      32-bit Arm Cortex-M33 core, 32-bit RISC architecture, FPU
      Serial wire port supports code download and debug
   Clocking options
      16 MHz on-chip oscillator
      160 MHz PLL output with programmable divider
      External clock source
   Memory
      2× 512 kB independent Flash/EE memories
         10,000-cycle Flash/EE endurance
         20-year Flash/EE retention
      128 kB SRAM with ECC
   Software triggered, in circuit reprogrammability via MDIO or I2C
   On-chip peripherals
      2× UART, 3× SPI, 3× I2C serial input/output
      Multilevel voltage (3.3 V, 1.8 V, 1.2 V) GPIOs
      MDIO slave up to 10 MHz
      5 general-purpose timers
      Wake-up timer (WUTs)
      Watchdog timers (WDTs)
      32-element PLA
      16-bit PWM
      10 external Interrupts
   Power
      Multiple supplies: 3.3 V for voltage DACs and ADCs, and
         3.3 V, 1.8 V, or 1.2 V for digital inputs/outputs
   Flexible operating modes for low power applications
   Packages and temperature range
      5 mm × 5 mm, 81-ball CSP_BGA and 3.46 mm × 3.46 mm
         64-ball WLCSP
      BGA package uses ULA molding compounds
      Fully specified for −40°C to +105°C operation
   Tools
      Low cost quick start development system
      Full third-party support

APPLICATIONS
   Optical networking 100 Gbps/200 Gbps/400 Gbps and
      higher frequency modules
   Industrial control, automation, and instrumentation systems