Features
■ Printable
■ Midweight Liner for Converting Ease
■ Translucent Matte Finish
■ Hypoallergenic, No Natural Rubber Latex
■ Light Adhesive Coating
■ Gamma & EtO Compatible
■ Conformable Composition: Tape Caliper, no liner 3.8 mil (0.10 mm) Printable Polyethylene Tape Backing 3.0 mil (0.08 mm) Translucent Polyethylene Film Adhesive Acrylate designed for medical/surgical use Liner 54 lb. Bleached Kraft Paper, silicone on one side (3.2 mils/0.08 mm) Typical Properties+: Adhesion to Steel, 180° Peel 19 ounces/inch width (0.5 Kg/25mm width) (5.3 N/25mm width) Liner Release 5 gm/inch width (5 gm/25 mm width) +3M test methods are available upon request. Roll Description: Tape supplied on 3 inch (76 mm) diameter cores. Length, Maximum 1250 yards (1143 meters) ± 2% Width, Maximum 48 inch (122 cm) ± 1/32 in (1.0 mm) Splices: Splices on the tape are intended for continuous processing. Roll Width Maximum Number of Splices per Roll < 8 inch (20 cm) 2 per 100 yd (91 m) 3 per 200 yd (183 m) 8 per 1250 yd (1143 m) Information on the splice frequency in roll widths greater than 8 inch (20 cm) is available upon request. Packaging and Recommended Storage: Product as supplied in original packaging will maintain stated properties for a period of two years from date stamped on shipping container when stored at temperatures of 50-80°F (10-27°C) and relative humidity of 40-60 percent. Please see reverse side for important product, safety and warranty information.