GENERAL DESCRIPTION
The PCF8881 is a low-power single chip TFT LCD driver with integrated source driver, gate driver, display RAM, timing control and DC-to-DC converter. The IC is a single chip solution with a minimum number of external components (capacitors).

FEATURES
• Low-power single chip Thin Film Transistor (TFT) LCD driver with integrated source driver, gate driver, display RAM, timing controller and DC-to-DC converter
• 528 outputs (132 × 132 RGB)
• 132 gate driver with up to 25 V output level
• Gate driver features:
    – Integrated programmable voltage generator for 2 gate levels (max. 25 V)
    – programmable scan direction for different glass routing
    – special driving modes (interlace, dancing).
• Integrated voltage generator for source driver (4.8 V max., −4.8 V min.)
• On-chip 132 × 132 × 16-bit display data RAM for 65 kbyte colours
• On-chip oscillator and timing controller
• On-chip common electrode voltage generator
• 4 predefined grey-level curves according to 4 gamma values
• Programmable grey-level curve with 2 × 16 externally available tab pins
• Integrated temperature compensation
• Display features:
    – Programmable frame refresh rate between 5 Hz and 85 Hz in 5 Hz steps
    – User selectable line or frame inversion
    – All pixels on/off modes
    – 8, 256, 4 k, and 65 k colour modes from look-up table (LUT).
• Interfaces:
    – 8-bit parallel interface (Intel 8080 and Motorola 68xx) with 16, 12 and 8-bpp resolution
    – extended 16-bit parallel interface (Intel 8080 or Motorola 68xx)
    – 3-line serial (9 bits per word).
• Digital power supply: 1.65 V to 1.95 V
• Analog power supply: 2.6 V to 2.9 V
• All driver settings are stored using a One Time Programming (OTP) block
• Slim chip layout, suitable for Chip-On-Glass (COG)
• Output staggered with 35 µm pitch.